A watch band my grandfather made

Give us your best or worst shot
Post Reply
User avatar
svaglic (Online)
ASSHAT & Master of Time
Posts: 4715
Joined: November 30th 2010, 11:00pm
Facebook ID: 0
Contact:

A watch band my grandfather made

Post by svaglic » April 6th 2015, 11:50pm

My grandfather was a machinist for TWA. In the slow periods he made various items like lunch buckets, ashtrays etc... he also made watch bands one year. He made these things for family and friends, never as a side business. The year of watch bands, we all got one. I found a box of odd keepsakes upstairs at my parents house and found this in it. I was in jr. high when we got them, at first I thought this was mine, but I think it was my mothers. Mine was used often and I'm sure scratched up quite a bit. It's too small for my wrist, the underside digs in and is a little painful.
Image
The rally parts look to be welded onto the cuff. The tops are rolled over to hold the watch pins.
Image
The shine is quite nice and I remember it took a lot of punishment and still looked good. I'm not sure what material it was made of, but I seem to recall some talk about aircraft steel, or something like that. One of the aircraft guys here will probably be able to help me out on the material. It's thin, sturdy and does not bend easy, it hold its shape well. It would actually take a lot to bend this.
Image
Here is a Don Juan cuff for comparison. This one is slightly thinner than the one my grandfather made. It isn't as shiny, smooth or sturdy, it bends out of shape very easily.
Image
Here is the underside. There isn't a sharp edge on this, it's a pretty nice finish.
Image
The Don Juan has adjustable arms, the one my grandfather made doesn't, so it limits the size of the watch that it can fit.
Image
The side by side shot. You can see the thickness differences and the Don Juan is a rough band with sharper edges.
Image

Thanks for looking. I am just impressed that my grandfather was so talented.. well, to me he was.
You can have brains or you can have beauty, but you can’t have all three.
User avatar
Mortuus Fakeuus

Re: A watch band my grandfather made

Post by Mortuus Fakeuus » April 7th 2015, 12:50am

That is amazing stuff, Svagy! His work is simply beautiful and fares exceptionally well when compared with the mass-produced stuff that's out there nowadays. My guess on the material is that it's either one of the many high grades of aircraft aluminum that predated titanium, or a very well made and superbly honed stainless steel. (If I had to pick one, I'd go with the former; aviation aluminum is some amazing stuff, and when formulated correctly is actually stronger than steel. There are a goodly number of former ensigns and 2nd Louie's out there who have found this out the hard way... ;) ) I do hope you won't continue to be so modest about your granddad; he was indeed so very talented. Thanks so much for sharing him with us.
User avatar
biglove (Online)
Watchlord WIS
Posts: 12730
Joined: October 27th 2013, 9:18am
Facebook ID: 0
Location: Deep South
Contact:

Re: A watch band my grandfather made

Post by biglove » April 7th 2015, 2:54pm

I didn't know these metal bands were even out there.

Looking at the work your grandfather did, it is obvious he was quite talented technically and possessed at least a fair amount of artistic flair. The finish work is fantastic on what I am betting is Aluminum, as Mort said, and that stuff isn't the easiest metal to work with.

Thanks for sharing his work with us! A family treasure for sure!
"Never insult anyone by accident."-Robert A. Heinlein

https://imgur.com/h3UXafB
User avatar
svaglic (Online)
ASSHAT & Master of Time
Posts: 4715
Joined: November 30th 2010, 11:00pm
Facebook ID: 0
Contact:

Re: A watch band my grandfather made

Post by svaglic » April 7th 2015, 5:42pm

Thanks guys. TWA treated him well, he got quite a few awards for inventions while he worked there. Boeing tried hard to recruit him away, but he didn't want to leave the area his and my grandma's family's were from. He was Croatian, he didn't speak English until he was in the 6th grade, then he taught himself to speak it without an accent. I always remember thinking that he was a remarkable man.
You can have brains or you can have beauty, but you can’t have all three.
User avatar
gerdson (Online)
Master of Time
Posts: 2384
Joined: January 7th 2013, 11:00pm
Facebook ID: 0
Location: Just north of Northern Krautland
Contact:

Re: A watch band my grandfather made

Post by gerdson » April 7th 2015, 9:02pm

Amazing. I'd think it is made of steel. I recon it could be more comfortable to wear, when You actually put it on a watch.
Ardnut since 1989

In twenty years or so, the German language will be one, massively long compound word.
-- conjurer
User avatar
Mortuus Fakeuus

Re: A watch band my grandfather made

Post by Mortuus Fakeuus » April 7th 2015, 10:53pm

svaglic wrote:Thanks guys. TWA treated him well, he got quite a few awards for inventions while he worked there. Boeing tried hard to recruit him away, but he didn't want to leave the area his and my grandma's family's were from. He was Croatian, he didn't speak English until he was in the 6th grade, then he taught himself to speak it without an accent. I always remember thinking that he was a remarkable man.

It sounds like you had every reason to think this. 'Americanized English' is one of the most difficult languages to master, even for a child of his age. As a would-be linguist myself, I certainly admire him for that. I can only imagine how much you miss him, Svagy.

I saw a saw a smallish aluminum sculpture of a B-36 Peacemaker bomber this morning on feeBay; it was attached to and appeared to be hovering ten inches over an aluminum ashtray set into an onyx base. It was very well executed, and it made me think of your granddad...
User avatar
jason_recliner
ASSHAT
Posts: 7294
Joined: September 17th 2011, 10:00pm
Contact:

Re: A watch band my grandfather made

Post by jason_recliner » April 8th 2015, 2:14am

Mortuus wrote:Or Martensitic, maybe? Eye rectum it mite bea arthur that, despite its hardness and limited pliability...yup.


You might be on to something there mate. I was leaving towards Austenitic mainly due to the lack of any visible sitting or other marking that one night expect with an older piece of higher carbon steel. Of course, it may just as likely be a superior Martensitic alloy, worked with skill, and stored carefully.
Copyright Reclinervision 2020 Productions. All rights reserved.

If it thinks, it stinks
Post Reply

Return to “Watch Photography Forum”

Who is online

Users browsing this forum: No registered users and 0 guests