The Origin of Clone Movements

This forum is for Horology and the art of watchmaking
Post Reply
User avatar
koimaster (Online)
Posts: 44961
Joined: December 16th 2009, 11:00pm
Location: Oregon, Thanks for visiting! Now go back home!

The Origin of Clone Movements

Post by koimaster » January 8th 2012, 10:28pm

The Origin of Clone Movements
Although some current Chinese watch movements originate from foreign designs, these likely have not been developed specifically to build fakes. Development and manufacture of mechanical watch movements are only within the means of major, established enterprises with too much to lose if caught building counterfeit watches. However, clones of popular Swiss and Japanese movements seem to have been developed primarily to accommodate demand from 3rd party OEM makers. Some of these manufacturers sell quantities of 'cleanskin' watches, which of course may easily be converted into fakes. Similar market forces drive the development of 'look-alike modules' i.e. generic movements with enhancements to produce a dial layout similar to a famous Swiss watch.
It is a myth that 'Asian ETA/Valjoux/Unitas' movements are made by Chinese companies using ETA tooling. A careful examination of ETA movements alongside their Chinese equivalents reveals some subtle differences. The Chinese designs appear to be adapted to simplify manufacturing and assembly and to enhance durability. There are other differences that are simply...different. Sea-Gull, Hangzhou, Liaoning, and Shanghai watch factories have all had to create their own tooling to produce these movements.

Common Swiss Movements and their Clones
ETA 2824-2 - ETA's basic automatic winding, twenty-five (25) jewel movement which traces its roots back to the 1950's.

» Near-exact copies of the 2824-2 are produced by Sellita (the SW200) in Switzerland and by Hangzhou (the 6300), Sea-Gull (the ST21) and Shanghai Watch Factory (designation unknown) in China. The Valanvron watch company in Switzerland assemble and finish ST21 ebauches as legally 'Swiss Made' movements, designated Valanvron 24.

Detailed comparison:

ETA 2836-2 - The day/date variant of the 2824-2

» Near-exact copies of the 2836-2 are the Swiss Sellita SW220, Chinese Hangzhou 6311 and a Sea-Gull ST21 variant. The Valanvron 36 is based on a Sea-Gull ebauche.

ETA 2892.A2 - ETA's more upscale 2892 is an automatic winding, twenty-one (21) jewel movement fitted with top quality components, with its design dating to the 1970's. Owing to it's relatively slim height of 3.60mm, the 2892.A2 provides a good platform on which to add or build a chronograph complication.

» The Sea-Gull ST18 is a near copy of the 2892. Valanvron assemble and finish ST18 ebauches as Swiss Made movements, designated Valanvron 92.

Detailed comparison:

Valjoux 7750 - The ETA/Valjoux 7750 is a widely used automatic winding, twenty-five (25) jewel chronograph movement, which can be fitted with a variety of features including the triple date (day, date, month and moon phase) or a variety of two and three register models with totalizers or counters for minutes, seconds and hours.

» Various Chinese clones of the 7750 are manufactured by the Liaoning Watch Factory and the Shanghai Watch Factory. Non-Chinese clones include the Swiss Sellita SW500 and Russian Maktime 30664.

Unitas 6497-1 - The ETA/Unitas 6497 is a large, manual winding, seventeen (17) jewel movement, often fitted with a subsidiary (small) seconds complication in the 9 o'clock position. Originally intended for pocket watches, the 6497 has seen a recent resurgence in popularity due to its association with Officine Panerai wristwatches and homages.

» Hangzhou's 9000 series is a near copy of an earlier version of the 6497/6498, whereas the Sea-Gull ST36 is closer to the current ETA version. Both Hangzhou and Sea-Gull versions are available in skeleton versions that stylistically differ from the ETA version.

Venus 175 - A hand-winding movement with column-wheel controlled chronograph with 30 minute totalizer, no hour totalizer. Production ceased in the early 1960s.

»Strictly speaking, the Sea-Gull ST19 is not a 'clone' of the Venus 175, as it is descended directly from a movement built on the same tool-set as the original Venus, transfered to the Tianjin Watch Factory in the 1960s for production of a watch exclusively for the Chinese air force. This ancient design was resurrected in the 21st century, and subtly but extensively upgraded to become the ST19. Due to its use in fake Omega Speedmasters, it is occasionally (and very incorrectly) referred to as a 'Lemania clone'.

From time to time, luxury Swiss watches are offered featuring refurbished vintage Swiss movements, including the Venus 175, however examples have emerged where Swiss companies have used the ST19 and claimed to use a vintage 175. Any such watch featuring more than 19 jewels and an escapement 'upgraded' to 21,600bph should be assumed to be a mis-labelled Sea-Gull ST19.

Note: A thorough comparison of Sea-Gull's clone movements and their ETA counterparts can be found on the TZ-UK forum:

Common Japanese Movements and their Clones
Miyota 8205/8215 - The Japanese made Citizen/Miyota 8205/8215 and 82S and 8N series variants are among the most popular off-the-shelf automatic movements used worldwide by OEM and proprietory watch manufacturers due to their robust nature and low cost. These movements are able to hand wind, but auto-wind in only one direction and lack a hacking (seconds stopping) function. The escapement beats at 21,600bph (6 beats per second).

» Chinese-made clones include the Dixmont Guangzhou DG28/38 series and near identical Nanning NN28/38 series. In their basic form these movements exactly match the dimensions of the Miyota movement, enabling them to compete directly for some of Miyota's established clients. Their most significant difference from the Miyota is the wide range of functional enhancements available on these movements, which gives the Chinese manufacturers a competitive edge in the marketplace. For example - the ability to offer a watch assembler both a day/date and a GMT complication compatable with the same case dimensions. Unlike the Miyota, the DG and NN movements have a hacking function. Fujitime is an example of a watch company that has switched from Miyota 8205/8215 to DG28. The DG/NN design may be visually distinguished from the Miyota by a stepped top plate with prominently chamfered holes for the jewels on the edge of the step.

Fujita offer a basic version of the DG/NN design, possibly finished from a bought-in ebauche. Qingdao Zixin have also produced some variants of the Miyota clone. The Beijing Watch Factory make a version of this same design, distingishable by a different shockproofing device, and usually a very high quality of finish. Elaborately decorated skeleton versions are produced, along with many unique calendar and dual-time functions.

» The Sea-Gull ST16 is also greatly influenced by the Miyota design, but with significant differences in the auto-winding mechanism, which is based on the Seiko system. Like the DG and NN movements, the basic ST16 is also dimensionally compatible with the Miyota, but also hacks. The revised ST17 positions the 4th wheel at 6 o'clock to better suit a seconds sub-dial, while retaining the Miyota dimensions. Both the ST16 and ST17 have a separate plate for the auto-winding module, making them easy to distinguish from a Miyota movement.

The excellent reputation of Miyota automatic movements has led to some on-line sellers claiming a 'Miyota' movement in watches using the DG or NN movements. The Croton watch company even goes so far as to designate the the DG28 used in their watches as 'Japanese CR8215 movement' and their sellers claim it is a 'modified Miyota'. The rotor is marked 'Japan', even though the DG logo is clearly visible below the balance wheel. Similarly, their day/date 'Japanese CR8205 movement' is in fact the Sea-Gull ST16.

Seiko 7009 - The classic 7009 movement is one of the most produced movement calibers in the world. Developed from earlier Seiko movements featuring the patented 'Magic Lever' winding system, the 7009 has the winding mechanism mounted directly on the top plate of the base movement, with the pawl on an off-set wheel engaging the rotor.

» Hangzhou's 2000 series of movements are based on the Seiko 7009. Hangzhou offers many complications for this movement series, most of which were never available from Seiko. The use of these movements in some counterfeit Seiko watches has led some to claim these movements were designed specifically for that purpose. However, given the costs associated with designing and tooling up for production of an all new movement, and the many un-Seiko-like enhancements also offered, it is far more likely that the movement was created for more general use, but its similar appearance to the Seiko 7s26 makes it attractive to fakers.

Orient 469 - Developed in parallel with the Seiko 7009, the base movement is almost identical, however the auto-winding uses the original Seiko arrangement of a rotor mounted on a bridge, with the 'Magic Lever' pawl attached directly to the rotor hub.

» A clone of unknown origin enjoys extensive use at the budget end of the market, especially short-lived brands from Shenzhen. An early client for this movement was Orion, Moscow. The Orient-clone is available in solid or skeleton, with date, day/date and day/date/24-hour options. The plates are often decorated with an etched and polished stripe pattern. Quality is generally lower than the Hangzhou 2000. Some sources state a Shanghai origin for these movements, and Golden Time seem likely, but firm evidence is lacking. Some on-line parts catalogues list these movements with the prefix 'SP'

» Fujita offer a basic day/date movement of similar design to the Orient clone described above, but with a differently-shaped auto bridge and a flange on one finger of the pawl. Standard of finish is poor. No other manufacturer is known to produce this design so it is probably an in-house design. Like the Hangzhou 2000, some of these Fujita movements have appeared in fake Seikos.
Last edited by Anonymous on January 9th 2012, 10:55am, edited 1 time in total.


“Your heart was warm and happy

With the lilt of Irish laughter

Every day and in every way

Now forever and ever after."
User avatar

Re: The Origin of Clone Movements

Post by themadhungarian » January 9th 2012, 7:00am

I really enjoy this kind of technical data and it is good to know some of the background of my Sea-Gull ST16. Thank you.
User avatar
Watchlord WIS
Posts: 9064
Joined: August 31st 2010, 10:00pm
Facebook ID: 0

Re: The Origin of Clone Movements

Post by Falstaff » January 9th 2012, 8:15am

By mixing and matching the components of several Swiss or Japanese movements to simplify manufacturing or increase durability of their clones, one could say the Chinese manufacturers have chosen "one from column A and two from column B".
Dies mei sicut umbra declinaverunt
User avatar
Watchlord WIS
Posts: 15071
Joined: October 27th 2013, 9:18am
Facebook ID: 0
Location: Louisiana

Re: The Origin of Clone Movements

Post by biglove » July 25th 2014, 12:50am

Missed this one before. Great info!
My best friend from college shared his secret to his huge financial success, "I fell out of the right vagina."

"We should just sanction stupidity as our national pastime and be done with it."-TemerityB, WL Asshat
Senior Member & WIS
Posts: 1836
Joined: July 11th 2019, 2:51pm
Facebook ID: 0

Re: The Origin of Clone Movements

Post by bbattle » January 10th 2022, 5:56am

And here you can get your SuperClone watches. ... a-watches/

An ETA 2824 clone is an automatic watch movement with identical specs to the legendary workhorse movement ETA caliber 2824 (or more accurately the current 2824-2).

Sellita SW200-1
SwissTP STP1-11
Seagull ST2130
Hangzhou 6301
Valanvron VAL-24
H.K. Precision Technology PT5000
Liaoning Peacock SL-3000
Ginault 7275

ETA 2824
Sellita 200
STP 111
Ginault 7275
Dongdong Caliber SI 3006 Peacock SI 3006
Post Reply

Return to “The Art of Time”

Who is online

Users browsing this forum: No registered users and 1 guest